Install NerdMiner Modded v1.0.0 onto your ESP32-2432S028R (CYD).
Tested on the CYD only. This firmware is built for the ESP32-2432S028R (2.8" Cheap Yellow Display) and has not been tested on any other board.
Writes the complete image to the board: bootloader, partition table and firmware. Use this the first time you flash a CYD, when coming from a different firmware, or to start again from a clean slate.
The installer asks whether to erase the device first. Tick Erase device for a completely clean start, which clears your Wi-Fi, pool and wallet settings so you will need to set them up again.
Writes just the application firmware and leaves the bootloader, partition table and your saved settings alone. Use this to upgrade a CYD that is already running NerdMiner Modded.
Don't use this on a board that has never had NerdMiner Modded (or another NerdMiner build with the same partition layout) on it. Do a full install first.
Connect your CYD via USB first. The installer needs a browser with Web Serial support, such as Chrome, Edge or Brave. After flashing, connect to the NerdMinerAP Wi-Fi network to enter your Wi-Fi details and BTC address.